1 <!-- $Id: introduction.xml,v 1.19 2005-06-27 22:03:59 adam Exp $ -->
2 <chapter id="introduction"><title>Introduction</title>
5 &yaz; is a C/C++ library for information retrieval applications
6 using the Z39.50/SRW/SRU protocols for information retrieval.
14 <ulink url="http://www.loc.gov/z3950/agency/">Z39.50</ulink>
15 version 3 support. Amendments and Z39.50-2002 revision is
20 <ulink url="http://www.loc.gov/z3950/agency/zing/srw/">SRW/SRU</ulink>
21 version 1.1 (over HTTP and HTTPS).
24 Includes BER encoders/decoders for the
25 <ulink url="http://www.nlc-bnc.ca/iso/ill/">ISO ILL</ulink>
29 Supports the following transports: BER over TCP/IP
30 (<ulink url="http://www.faqs.org/rfcs/rfc1729.html">RFC1729</ulink>),
31 BER over unix local socket, and
32 <ulink url="http://www.w3.org/Protocols/rfc2616/rfc2616.html">HTTP
36 Secure Socket Layer support using
37 <ulink url="http://www.openssl.org/">OpenSSL</ulink>.
38 If enabled, &yaz; uses HTTPS transport (for SOAP) or
39 "Secure BER" (for Z39.50).
43 <ulink url="http://zoom.z3950.org/">ZOOM</ulink>
44 C API implementing both Z39.50 and SRW.
47 The &yaz; library offers a set of useful utilities
48 related to the protocols, such as MARC (ISO2709) parser,
50 <ulink url="http://www.loc.gov/z3950/agency/zing/cql/">CQL</ulink>
51 parser, memory management routines, character set conversion.
54 Portable code. &yaz; compiles out-of-the box on most Unixes and
55 on Windows using Microsoft Visual C++.
58 Fast operation. The C based BER encoders/decoders as well
59 as the server component of &yaz; is very fast.
62 Liberal license that allows for commercial use of &yaz;.
67 <sect1 id="introduction.reading"><title>Reading this Manual</title>
68 <para>Most implementors only need to read a fraction of the
69 material in thie manual, so a quick walkthrough of the chapters
75 <xref linkend="installation"/> contains installation
76 instructions for &yaz;. You don't need reading this
77 if you expect to download &yaz; binaries.
78 However, the chapter contains information about how
79 to make <emphasis>your</emphasis> application link
86 <xref linkend="zoom"/> describes the ZOOM API of &yaz;.
87 This is definitely worth a read if you wish to develop a Z39.50/SRW
94 <xref linkend="server"/> describes the generic frontend server
95 and explains how to develop server Z39.50/SRW applications for &yaz;.
96 Obviously worth reading if you're to develop a server.
102 <xref linkend="client"/> describes how to use the &yaz; Z39.50
103 client. If you're developer and wish to test your server
104 or a server from another party, you might find this chapter
111 <xref linkend="asn"/> documents the most commonly used Z39.50
112 C data structures offered by the &yaz; API. Client
113 developers using ZOOM and non-Z39.50 implementors may skip this.
119 <xref linkend="soap"/> describes how SRW and SOAP is used
120 in &yaz;. Only if you're developing SOAP/SRW applications
121 this section is a must.
127 <xref linkend="tools"/> contains sections for the various
128 tools offered by &yaz;. Scan through the material quickly
129 and see what's relevant to you! SRW/SRU implementors
130 might find the <link linkend="tools.cql">CQL</link> section
137 <xref linkend="odr"/> goes through the details of the
138 ODR module which is the work horse that encodes and decodes
139 BER packages. Implementors using ZOOM only, do <emphasis>not</emphasis>
141 Most other Z39.50 implementors only need to read the first two
142 sections (<xref linkend="odr.introduction"/> and
143 <xref linkend="odr.use"/>).
149 <xref linkend="comstack"/> describes the network layer module
150 COMSTACK. Implementors using ZOOM or the generic frontend server
151 may skip this. Others, presumably, handling client/server
152 communication on their own should read this.
158 <sect1 id="introduction.api"><title>The API</title>
161 The <ulink url="http://www.indexdata.dk/yaz/">&yaz;</ulink>
162 toolkit offers several different levels of access to the
163 <ulink url="http://www.loc.gov/z3950/agency/">ISO23950/Z39.50</ulink>,
164 <ulink url="http://www.nlc-bnc.ca/iso/ill/">ILL</ulink> and
165 <ulink url="http://www.loc.gov/z3950/agency/zing/srw/">SRW</ulink>
167 The level that you need to use depends on your requirements, and
168 the role (server or client) that you want to implement.
169 If you're developing a client application you should consider the
170 <link linkend="zoom">ZOOM</link> API.
171 It is, by far, the easiest way to develop clients in C.
172 Server implementers should consider the
173 <link linkend="server">generic frontend server</link>.
174 None of those high-level APIs support the whole protocol, but
175 they do include most facilities used in existing Z39.50
179 If you're using 'exotic' functionality (meaning anything not included in
180 the high-level APIs), developing non-standard extensions to Z39.50 or
181 you're going to develop an ILL application you'll have to learn the lower
185 The YAZ toolkit modules is shown in figure <xref linkend="yaz.layer"/>.
187 <figure id="yaz.layer">
188 <title>YAZ layers</title>
191 <imagedata fileref="apilayer.png" format="PNG"/>
194 <imagedata fileref="apilayer.eps" format="EPS"/>
199 There are four layers.
202 <para>A client or server application (or both).
203 This layer includes ZOOM and the generic frontend server.
208 The second layer provides a C represenation of the
209 protocol units (packages) for Z39.50 ASN.1, ILL ASN.1,
215 The third layer encodes and decodes protocol data units to
216 simple packages (buffer with certain length). The &odr; module
217 encodes and decodes BER whereas the HTTP modules encodes and
218 decodes HTTP ruquests/responses.
223 The lowest layer is &comstack; which exchanges the encoded packages
224 with a peer process over a network.
230 The &asn; module represents the ASN.1 definition of
231 the Z39.50 protocol. It establishes a set of type and
232 structure definitions, with one structure for each of the top-level
233 PDUs, and one structure or type for each of the contained ASN.1 types.
234 For primitive types, or other types that are defined by the ASN.1
235 standard itself (such as the EXTERNAL type), the C representation is
236 provided by the &odr; (Open Data Representation) subsystem.
239 &odr; is a basic mechanism for representing an
240 ASN.1 type in the C programming language, and for implementing BER
241 encoders and decoders for values of that type. The types defined in
242 the &asn; module generally have the prefix <literal>Z_</literal>, and
243 a suffix corresponding to the name of the type in the ASN.1
244 specification of the protocol (generally Z39.50-1995). In the case of
245 base types (those originating in the ASN.1 standard itself), the prefix
246 <literal>Odr_</literal> is sometimes seen. Either way, look for
247 the actual definition in either <filename>z-core.h</filename> (for the types
248 from the protocol), <filename>odr.h</filename> (for the primitive ASN.1
250 The &asn; library also provides functions (which are, in turn,
251 defined using &odr; primitives) for encoding and decoding data values.
252 Their general form is
255 <funcprototype><funcdef>int <function>z_<replaceable>xxx</replaceable></function></funcdef>
256 <paramdef>ODR <parameter>o</parameter></paramdef>
257 <paramdef>Z_<replaceable>xxx</replaceable> **<parameter>p</parameter></paramdef>
258 <paramdef>int <parameter>optional</parameter></paramdef>
259 <paramdef>const char *<parameter>name</parameter></paramdef>
262 (note the lower-case "z" in the function name)
267 If you are using the premade definitions of the &asn; module, and you
268 are not adding new protocol of your own, the only parts of &odr; that you
269 need to worry about are documented in
270 <xref linkend="odr.use"/>.
275 When you have created a BER-encoded buffer, you can use the &comstack;
276 subsystem to transmit (or receive) data over the network. The &comstack;
277 module provides simple functions for establishing a connection
278 (passively or actively, depending on the role of your application),
279 and for exchanging BER-encoded PDUs over that connection. When you
280 create a connection endpoint, you need to specify what transport to
281 use (TCP/IP, SSL or UNIX sockets).
282 For the remainder of the connection's lifetime, you don't have
283 to worry about the underlying transport protocol at all - the &comstack;
284 will ensure that the correct mechanism is used.
287 We call the combined interfaces to &odr;, &asn;, and &comstack; the service
288 level API. It's the API that most closely models the Z39.50
289 service/protocol definition, and it provides unlimited access to all
290 fields and facilities of the protocol definitions.
293 The reason that the &yaz; service-level API is a conglomerate of the
294 APIs from three different submodules is twofold. First, we wanted to allow
295 the user a choice of different options for each major task. For instance,
296 if you don't like the protocol API provided by &odr;/&asn;, you
297 can use SNACC or BERUtils instead, and still have the benefits of the
298 transparent transport approach of the &comstack; module. Secondly,
299 we realize that you may have to fit the toolkit into an existing
300 event-processing structure, in a way that is incompatible with
301 the &comstack; interface or some other part of &yaz;.
306 <!-- Keep this comment at the end of the file
311 sgml-minimize-attributes:nil
312 sgml-always-quote-attributes:t
315 sgml-parent-document:"yaz.xml"
316 sgml-local-catalogs: nil
317 sgml-namecase-general:t